VSD Intern - DAC IP Design using Sky130 PDKs - Part 2




VSD Intern - DAC IP Design using Sky130 PDKs - Part 2

The webinar aims to circuit design of a 10-bit potentiometric Digital to Analog Converter, from scratch, using Xschem and Sky130 PDKs. The target is to design 10-bit potentiometric DAC with 3.3v analog voltage, 1.8v digital voltage and 1 off-chip external voltage reference. This is a follow-up webinar of "VSD Intern - DAC IP design using Sky130 PDKs - Part 1" conducted by Skandha Deepsita

In real world, most of the data available is in the form of analog in nature. We have two types of converters analog to digital converter and digital to analog converter. These two converting interfaces are essential to obtain the required operations of a processor to manipulate the data of digital electronic equipment and an analog electric equipment. Digital to Analog Converter (DAC) is a device that transforms digital data into an analog signal in order to interact with the real world. The digital signal is represented with a binary code, which is a combination of bits 0’s and 1’s. The digital data can be produced from a microprocessor, Field Programmable Gate Array (FPGA), or Application Specified Integrated Circuit (ASIC). There are two commonly used DAC conversions – Weighed resistors method and R-2R ladder network method. Applications of a DAC: audio amplifier, video encoder, display electronics, data acquisition systems, calibration, Digital potentiometer.

This webinar will cover:

1) Tools Demo – Hands-on

  • Schematic Capture Tools

  • Spice Deck.

  • Interpretation of Spice netlist.

  • Spice Simulation

2) DAC Circuit Design

  • Sub-modules Required for a basic DAC

  • Selection of W/L for transistors

  • Selection of Cap Values

  • Selection of Resistor Values

  • Hierarchical Design of n-bit DAC

7) Design Simulations – Hands-on

  • Simulation of all circuits

  • Parameters evaluation

All the best and happy learning

10-bit DAC full circuit design using Xschem and Sky130 PDKs

Url: View Details

What you will learn
  • Basic circuit design using real foundry data from Skywater technology
  • DAC circuit design principle
  • Basic CMOS switch fundamentals and design using Xschem

Rating: 5

Level: Beginner Level

Duration: 1.5 hours

Instructor: Kunal Ghosh


Courses By:   0-9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

About US

The display of third-party trademarks and trade names on this site does not necessarily indicate any affiliation or endorsement of course-link.com.


© 2021 course-link.com. All rights reserved.
View Sitemap