VFD Basics with Real Applications Supported by PLC & HMI




VFD Basics with Real Applications Supported by PLC & HMI

Dear Students,

We prepared applications for you by using delta vfd , schneider vfd , lenze vfd with real hardware.

You will see how we can control a 3 phase motor.

You will see how the parameters of vfds affect the motor.

We read all the values ​​of the vfd over Modbus communication and wrote the values ​​to the vfd.

We run the vfd with the keypad on it.

We run the vfd with the buttons on it.

We run the vfd frequency with digital potentiometer or up and down keys.

At the same time, we checked the vfd with the external terminals.

We wrote a frequency value to the vfd with an external potentiometer.

We controlled the vfd with serial communication over PLC and wrote all frequency values ​​over communication.

At the same time, we gave the forward-reverse and stop-run commands of the vfd over communication.


We have programmed the terminals on the vfd and made applications for you to do almost any application.

We did PID control with the vfd.

We applied different voltages to the vfd and the motor, applied dc brakes and monitored all results.

With the Dopsoft program, we made control the vfd via hmi.

While learning dopsoft on the one hand, we showed all the values ​​of the vfd on the screen with dopsoft on the other hand.

And we wrote to the vfd from the HMI .


We learned about plc programming by making small applications with basic plc programming training.


With the VFDSoft program, we connected to the vfd and checked the vfd on the computer.

We backed up the vfd parameters and uploaded the backed-up parameters to the vfd.

We watched and recorded the vfd's information with the trend.

We have seen how we can easily change the parameters of the vfd with vfdsoft.


With schneider VFD sections, you can learn that complete parameter structure of Schneider vfds.

Also , in Lenze VFD section , you can learn that basics of Lenze 8200 vector vfd and also how to control it via pc or via terminals.


Shortly , what you will learn

- Delta AC Vfds

- Delta VFD Parameters and Applications

- Schneider ATV Vfds

- Schneider ATV12 VFD Applications

- Schneider ATV12 VFD Control Methods

- VFDSoft

- ISPSoft

- Basics of Plc Programming

- AS200 Series Plc

- DOPSoft

- DOP 100 HMI Basics

- Complete Modbus (RS-485) Communication

- PID Control

- Motor Control for Different Conditions and Applications

- Lenze 8200 Vector VFD

- Global Drive Control (GDC) Software

And much more than these.

You can learn deeply how to control vfds with different brand vfds.


If you stuck at any point that you can ask a question directly to us.

Learn AC Drive (VFD) Basics with Real Hardware (Supported By PLC & HMI & Modbus and Softwares)

Url: View Details

What you will learn
  • Delta AC Drives
  • Modbus Communication
  • HMI Programming

Rating: 4.05

Level: All Levels

Duration: 10.5 hours

Instructor: Derstagram Akademi


Courses By:   0-9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

About US

The display of third-party trademarks and trade names on this site does not necessarily indicate any affiliation or endorsement of course-link.com.


© 2021 course-link.com. All rights reserved.
View Sitemap