Design the High Rise Buildings ( Level 2 )

Design the High Rise Buildings ( Level 2 )

In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :

Part 1 ( ETABS Model )

1. Check Load Combinations .

2. Check Static Seismic Forces AS Per UBC97.

3. Check Dynamic Seismic Forces AS Per UBC97.

4. Check P-Delta Analysis

5. Check the Mass Source.

6. Check The Time Period.

7. Check The Mode Shapes.

8. Check The Wind Tunnel .

9. Check The Base Shear As Per UBC97

10. Check Displacement Per Wind As Per ASCE7-16

11. Check The Overturning Moment.

12. Check Seismic Drift As Per UBC97

13. Design All Members Using ACI318M-14

Part 2 ( SAFE Model )

1. Check The Materials, Slabs thickness, Rebars and loads

2. Check Load Combinations As Per ACI318M-14

3. Draw the strips for designing .

4. Check Automatic Mesh.

5. Check the Stiff Areas.

6. Check The Deflection As Per ACI318M-14

7. Design The Slab AS Per ACI318M-14

8. Check The Punching AS Per ACI318M-14

At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.

Structural Engineering Software ( ETABS&SAFE ), from point of view of skyscrapers design engineer .

Url: View Details

What you will learn

• In this course the engineers will learn how to use the technical software with required codes to achieve the optimal and safer design to the high rise buildings .
• To be structural designer
• This course is a continuation of Design The High Rise Buildings Series ( Level 1 ,2 and 3 )

Rating: 4.75

Level: All Levels

Duration: 3 hours

Instructor: Mohammed Ashraf Mostafa